MSW’s Take: Cockpit adjustable brake bias is a handy tool for changing track (and car balance) conditions. Unfortunately most adjustment knobs are a bit of a guessing game on where you started and where you ended turning the knob. These Monit adjustment knobs give a real time digital read out of just how many clicks you made to the front or rear. They can also be zero’d, so you always know how to get back to your base setting. We’ve upgraded several factory GT4 cars with these knobs and have been impressed with the quality. Plus they come in orange, so that’s pretty cool.
Designed to work with all race pedal boxes, racing pedal assemblies, and balance bars, the new patent pending Monit Brake Dial is a remote brake bias adjuster that allows you to easily view, and adjust, the position that your brake bias is set too. Reset the display to ‘zero’ at your preferred position and confidently adjust for changing conditions to gain maximum braking performance – knowing you can accurately return to your starting point if you need to.
Replace your old remote bias adjuster with the new Monit Brake bias Dial and take control of your race braking performance.
- Remove the risk of error. Optimize for the conditions.
- Built tough. Shock and water resistant.
- Enables pin-point accuracy of brake balance setting.
- Two independent ‘zero’ point settings are stored.
- Brake position displayed continuously.
- Easy-to-use. Adjustable driver viewing preference.
- Compact size. Quick and easy installation.
- Universally compatible with all pedal boxes.
Square Mount Version
- 4x M4 black stainless steel cap screws
- 4x M4 lock nuts
- 1x Inner and outer flexible shaft – 1500mm long
- 5x Cable clamps
- 2x Rotation direction indication labels
- 2x Balance bar to cable adaptors (7/16” and 3/8” threads)
- 2x Jam nuts (7/16” and 3/8” threads)
- 1x T5 Torx screwdriver
Bulkhead Mount Version
- 1x M20 black mounting nut
- 1x Inner and outer flexible shaft – 1500mm long
- 5x Cable clamps
- 2x Rotation direction indication labels
- 1x M2 Cheese head anti-rotation fastener
- 2x Balance bar to cable adaptors (7/16” and 3/8” threads)
- 2x Jam nuts (7/16” and 3/8” threads)
- 1x T5 Torx screwdriver