E46 Rear Subframe Chassis Reinforcement Kit
A “Must Do” reinforcement for any E46 that is driven hard, both street, track, and racing conditions. We reinforce every E46 that we put on track.
The E46 Rear Subframe/Chassis Reinforcement Kit solves a problem that plagues the E46 3-series just as it did with the earlier E36 3-Series models. This kit is developed in-house at BimmerWorld and has more surface area and covers more of the problem areas than older competitor’s kits.
The rear subframe-to-chassis attachment points on the E46 are all failure prone and can rip away from the unibody after time. This can occur with regular road use, and if you drive your BMW E46 hard, then chances are very high that you’ll need to repair this area at some point in the future. We highly recommend doing this modification to any car that sees autocross, driving schools, and race use BEFORE the damage occurs. These E46 reinforcement plates are a factory fit and can be welded in when subframe bushings are replaced.
This kit applies to all BMW E46 cars, including the M3.
The E46 Rear Subframe/Chassis Reinforcement Kit consists of 4 main subframe mounting point reinforcements, spacers to realign the cross member, hardware, and plates to cover the access panels in the trunk.
- Welding is required
- Fits all E46 models, including M3
- Protects subframe and chassis from costly damage
- Factory-like fitment
- Must-have for any and all E46s driven hard on the street or track
|Dimensions||10 × 8 × 2 in|
Only logged in customers who have purchased this product may leave a review.