MXS Strada is a 5″ color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and – optionally – the GPS08 Module.
There are two available versions, one with standard alarm LEDs, and one with Street Car Icons.
MXS Strada shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, laptimes and much more…
You can choose the custom pages you wish among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages is quite easy using the pushbuttons.
The ten multicolored RGB shift lights can be customized as you like, defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels or – optionally – GPS information. You choose conditions and colors: select a solid alarm or flashing one – and the flashing frequency. It is also possible to configure an accompanying text message, and set the alarm priorities.
MXS Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU. This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.
MXS Strada is configured via Race Studio 3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.
700cd/m2 – 1,100 Lumen
|Ambient light sensor|| |
|Alarm LEDs|| |
6 RGB freely configurable
|Shift lights|| |
10 integrated freely configurable RGB LEDs
|CAN connections|| |
|ECU connections|| |
CAN, RS232 or K-Line
|ECU compatibility|| |
+ 1,000 industry leading ECUs
|Expansion CAN connection|| |
GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
|Analog inputs|| |
4 fully configurable, max 1 kHz each
|Digital inputs|| |
1 speed input, coil RPM input
|Digital outputs|| |
1 (1 A max)
|Second CAN|| |
2 AMP connectors
|Power consumption|| |
Included: MXS Strada, USB cable, 14 pins standard wiring, 23 pins connector + contacts, software installation CD, connection cable (OBD or CAN)